Epson EH-TW9000 Service Manual

EH-TW8000/TW9000/TW9000W Appendix CONFIDENTIAL
SEIKO EPSON 125 Revision A
4.1.3 Initializing (Resetting) the AS Menu Values
The operational procedures and the values of initialization of the AS Menu are shown
below.
Type
Clearing the Lamp
Information
Clearing the AS
Information
Clearing the Log
Information
Operation
Press [ ] and [Up]
on the projector for
10 sec. during dis-
playing the menu.
Press [ ] and
[Down] on the pro-
jector for 10 sec. dur-
ing displaying the
menu.
Press [Right] either
on the projector or
the controller for
more than 5 sec.,
then within 3 sec.
press [Enter] for 2
sec. during display-
ing the menu.
Item
Total Operation
Time
N/A Reset to 0 N/A
Lamp Operation
Time (C/H//L/3D)
Reset to 0 Reset to 0 N/A
Lamp ON Reset to 1 Reset to 1 N/A
Lamp OFF Reset to 0 Reset to 0 N/A
Lamp Replacement
Add 1 to the
current value
Reset to 0 N/A
Cool Down
Completed
Reset to 0 Reset to 0 N/A
Error Log N/A N/A
Spacing (Initialized
to the status of
acquiring none)
Error Count N/A N/A Reset to 0
Control N/A N/A N/A

Epson EH-TW9000 Specifications

General

Brand	Epson
Model	EH-TW9000
Category	Projector
Language	English