EH-TW8000/TW9000/TW9000W Troubleshooting CONFIDENTIAL
SEIKO EPSON 51 Revision A
2.4.6 Cable Connection and Projector’s Status
This section describes the projector’s status when disconnection occurs somewhere between the parts/units and the MA Board. Refer to the following table and check the doubted
connectors are securely connected. If there is a disconnection or a loose connection, connect it correctly.
Figure 2-9. Connector layout of the MA Board
䎦䎱䎖䎜䎓䎕
䎦䎱䎖䎜䎓䎘
䎦䎱䎔䎖䎓䎔
䎦䎱䎜䎔䎓䎓
䎦䎱䎜䎖䎓䎓
䎦䎱䎜䎕䎓䎓
䎦䎱䎔䎓䎔
䎦䎱䎘䎖䎓䎔
䎦䎱䎘䎖䎓䎖
䎦䎱䎘䎖䎓䎓
䎦䎱䎘䎖䎓䎕
䎦䎱䎖䎜䎓䎚
䎦䎱䎖䎚䎓䎕
䎦䎱䎖䎜䎓䎔
䎦䎱䎖䎜䎓䎗
䎦䎱䎖䎜䎔䎔
䎦䎱䎖䎜䎓䎓
䎦䎱䎖䎜䎓䎛
䎦䎱䎖䎚䎓䎔
䎦䎱䎖䎜䎓䎙
䎦䎱䎖䎜䎓䎖
䎦䎱䎔䎖䎓䎕
䎦䎱䎗䎔䎓䎓
䎦䎱䎖䎚䎓䎓
䎦䎱䎔䎓䎕
䎦䎱䎖䎚䎓䎗
䎦䎱䎖䎜䎓䎜
Connector (Front side)
Connector (Back side)