Epson LX-300+II RTP User Manual

EPSON LX-300+II/300+II RTP/1170II Revision D
PRODUCT DESCRIPTION Control codes 30
1.5.2 IBM 2380/2381 Plus Emulation
LX-300+II/LX-1170II supports not only ESC/P2 but also the following control code.
 LX-300+II: IBM2380
 LX-1170II: IBM2381
Table 1-29. IBM 2380/2381 Plus emulation
Classification Operation Command
General Operation Nop NUL, DC3
Off Line ESC j
Buzzer BEL
Cancellation CAN
Select / Deselect DC1, ESC Q
Initialize Printer ESC [K
Unidirectional Printing ESC U
Select Auto Sheet Feeder ESC [F
Paper feeding Form Feed FF
Line Feed,
Auto Line Feed
LF, ESC5
Line Spacing
ESC A, ESC 0, ESC 1, ESC 2,
ESC3
Carriage Return CR
Reverse Line Feed ESC]
Page format Page Length ESC C, ESC C0
Left / Right Margin ESC X
Skip Over Perforation ESC N, ESC O
Set TOF ESC 4
Print position motion Horizontal Print Position ESC d
Initialize Tab Position ESC R
Tab Horizontally ESC D, HT
Tab Vertically ESC B, VT
Advance paper ESC J
Font selection Pitch DC 2, ESC P, ESC:
Bold Font ESC E, ESC F
Master Select ESC I
Print Quality ESC [d
Select Font and Pitch ESC [I
Font enhancement Double-Width DC4, SO, ESC SO, ESC W
Enlarge and Life Space ESC [@
Condensed SI, ESC SI
Double-Strike ESC G, ESC H
Super-/ Subscript ESC T, ESC S
Underline ESC -
Line / Score ESC_
Spacing Back Space BS
Space SP
Character handling Character Table ESC 6, ESC 7, ESC [T
Print Data as Characters ESC ^, ESC ¥
Bit image Bit Image ESC K, ESC L, ESC Y, ESC Z
Bar code Set up Bar code ESC [f
Transfer Bar code ESC [p
Download Download ESC=(only Draft mode)
Table 1-29. IBM 2380/2381 Plus emulation (continued)
Classification Operation Command

Epson LX-300+II RTP Specifications

General

Brand	Epson
Model	LX-300+II RTP
Category	Printer
Language	English