Epson SC-F9200 series User Manual

Notes on Usage and
Storage
Installation space
Make sure that you secure the following space, clear of
any other objects, so that paper ejection and
consumable replacement are not obstructed.
See the “Specifications Table” for the external
dimensions of the printer.
U “Specifications Table” on page 131
Notes when using the printer
Note the following points when using this printer to
avoid breakdowns, malfunctions, and print quality
decline.
❏ When using the printer, observe the operating
temperature and humidity range described in the
"Specifications Table". U “Specifications Table”
on page 131
Note, however, that the desired results may not be
achieved if the temperature and humidity are
within the limits for the printer but not within those
for the media. Be sure the operating conditions suit
the media. For more information, see the
documentation supplied with the media.
Also, when operating in dry areas, air conditioned
environment, or under direct sunlight, maintain
the appropriate humidity.
❏ Avoid using the printer in locations that are
exposed to direct draughts from ventilators or air
conditioners. The print head nozzles could dry out
and clog.
❏ Use the printer in a location that is sufficiently
ventilated.
❏ When using a commercially available heater, use it
within the recommended operating temperature
range. If it is used outside the recommended range,
it could cause print quality to decline and clog the
nozzles in the print head. U “Specifications
Table” on page 131
❏ Do not bend or tug the waste ink tube. Ink could
spill inside or around the printer.
❏ Maintenance such as cleaning and replacement
must be performed according to usage frequency or
at recommended intervals. Failure to perform
regular maintenance could cause print quality to
decline. In the absence of the appropriate
maintenance, continued use could damage the
print head.
U “When to Perform Various Maintenance
Operations” on page 55
❏ The print head may not be capped (the print head
may not return to the right side) if the printer is
turned off when the media is jammed or an error
has occurred. Capping is a function for
automatically covering the print head with a cap
(lid) to prevent the print head from drying out. In
this case, turn on the power and wait a while until
capping is performed automatically.
❏ When the power is on, do not remove the power
plug or cut the power at the breaker. The print head
may not be capped properly. In this case, turn on the
power and wait a while until capping is performed
automatically.
❏ The print head is automatically cleaned at a fixed
interval after printing to keep the nozzle from
clogging.
Be sure that the Waste Ink Bottle is placed whenever
the printer is on.
U “Printer Setup Menu” on page 96
❏ As well as being expended during printing, ink is
used during head cleaning and other maintenance
required to keep the print head in working order.
❏ To ensure your printouts have a stable coloring,
maintain a constant room temperature of 15 to
25˚C.
SC-F9200 Series User's Guide
Introduction
20

Epson SC-F9200 series Specifications

General

Brand	Epson
Model	SC-F9200 series
Category	Printer
Language	English