(3) Apply grease to pad B.
C
Grease carriage rod B.
Hold pad B against the front of the rod and
smoothly slide it twice from one end to the other
and back again as shown in Step 1.
D
Close the front cover and press the Z button.
The carriage moves back and forth.
E
Remove the stained pad from the grease tool, and
store it with grease tool and the grease.
Disposing of used pads, cleaning sticks, and
other items used to apply grease
U “Disposal of Used Consumables” on
page 86
Storage
❏ Replace the cap to prevent foreign objects falling
into the grease.
❏ Store the container at room temperature with the
cap uppermost in a location that is not exposed to
direct sunlight.
Disposal of Used
Consumables
Used ink packs, chip units, cleaning sticks, waste ink
bottles, wipers, wiper cleaners, and post-printing media
are industrial waste.
Dispose of items according to local laws and regulations.
For example, contract a industrial waste disposal
company for disposal. In such cases, submit the “Safety
data sheet” to the industrial waste disposal company.
You can download it at your local Epson Web site.
Parts That Are Periodically
Replaced
The following parts require periodic replacement.
(as of May, 2015)
The time until the following parts need to be replaced
depends on the conditions of use.
❏ Ink supply tank
❏ PF Roller Center Support
The part life varies with operating conditions. Base the
decision to replace the print head on the quality of the
print results.
SC-F9200 Series User's Guide
Maintenance
86
To Next Page
Loading...
Need help?
General