Epson SC-F9200 series User Manual

Menu List
The following items and parameters can be set and executed in the Menu. See the reference pages for more details on
each item.
Menu Item Parameter
Media Setup
U “The Media
Setup Menu” on
page 92
Media Remaining
Remaining Setup ON, OFF
Length 1.0 to 999.5 m (3 to 3000 ft)
Remaining Alert 1 to 15 m (4 to 50 ft)
Print Remaining Length Print
Select Media 1 to 30 (media setting bank number), RIP Settings
Customize Settings
Current Settings Change settings for currently selected media. The options
available depend on whether RIP Settings or a media setting
bank is selected. More information on the options available
can be found below in the entries for RIP Settings and media
setting banks 1 to 30.
1 to 30 (media setting bank number)
Setting Name Up to 22 half-size characters
Feed Adjustment Manual
Platen Gap 1.5, 2.0, 2.5
Head Alignment Manual(Uni-D), Manual(Bi-D), Manual(Dual Head)
Heating & Drying
Heater Temperature OFF, 30 to 55 ˚C
Drying Time Per Pass 0 to 10 sec
Blank Area Feed Mode 0, Mode 1, Mode 2, Mode 3
After Heater Feed ON, OFF
Media Suction 0 to 10
Head Movement Data Width, Printer Full Width
Multi-Strike Printing OFF, 2 to 8
Roll Type Printable Side Out, Printable Side In
Tension Measurement Periodically, Every Page
SC-F9200 Series User's Guide
Using the Control Panel Menu
88

Epson SC-F9200 series Specifications

General

Brand	Epson
Model	SC-F9200 series
Category	Printer
Language	English