D Paper cassette cover
To prevent the inside of the printer from getting dusty, attach the cover to the paper cassette when printing cut
sheets on super A3 or larger.
You do not need to use the cover for other cases.
U “Loading the Paper Cassette” on page 39
E Output tray
Ejected paper is collected here. Extend according to the size of the paper being ejected.
F Maintenance Box 2
This container collects waste ink when printing beyond the edges of the paper for borderless printing.
U “Replacing Maintenance Box 2” on page 133
G Paper eject support
Supports smooth ejection of the paper by raising the paper eject support when printing on plain roll paper and
when the optional SpectroProofer is installed.
U “Loading roll paper” on page 33
H Front manual feeder
Feed paper into this slot when printing on cut sheets that are 0.8 mm thick or thicker.
U “Loading and Ejecting Thick Paper” on page 46
I Cartridge cover (right)
Open when replacing ink cartridges or Maintenance Box 1.
U “Replacing Ink Cartridges” on page 130
U “Replacing Maintenance Box 1” on page 132
J Maintenance Box 1
Container for collecting waste ink.
K Ink cartridges
Install ink cartridges on the left and right for a total of 11 colors. Ink cartridge order
U “Screen View” on page 18
L Print head
Fires ink via high density nozzles while moving left and right to print.
Do not move the print head by hand.
M Control panel
U “Control panel” on page 16
SC-P5000 Series User's Guide
Introduction
12
To Next Page
Loading...
Need help?
General