To Next Page

To Previous Page

Changing the Wi-Fi Direct (Simple AP) Settings

When Wi-Fi Direct (simple AP) connection is enabled, you can change the settings from > Wi-Fi

Direct > Start Setup > Change, and then the following menu items are displayed.

Change Network Name

Change the Wi-Fi Direct (simple AP) network name (SSID) used for connecting to the printer to your arbitrary

name. You can set the network name (SSID) in ASCII characters that is displayed on the soware keyboard on the

control panel.

When changing the network name (SSID), all connected devices are disconnected. Use the new network name

(SSID) if you want to re-connect the device.

Change Password

Change the Wi-Fi Direct (simple AP) password for connecting to the printer to your arbitrary value. You can set

the password in ASCII characters that is displayed on the

soware

keyboard on the control panel.

When changing the password, all connected devices are disconnected. Use the new password if you want to re-

connect the device.

Disable Wi-Fi Direct

Disable Wi-Fi Direct (simple AP) settings of the printer. When disabling it, all devices connected to the printer in

Wi-Fi Direct (Simple AP) connection are disconnected.

Restore Default Settings

Restore all Wi-Fi Direct (simple AP) settings to their defaults.

e Wi-Fi Direct (simple AP) connection information of the smart device saved to the printer is deleted.

Disabling Wi-Fi from the Control Panel

When Wi-Fi is disabled, the Wi-Fi connection is disconnected.

Network Settings

Disabling Wi-Fi from the Control Panel

Epson WorkForce WF-2870 Series User Manual

Questions and Answers: