3.
Set Remote Receive to On.
4.
Select Start Code, enter a two digit code (you can enter 0 to 9, *, and #), and then select OK.
5.
Select Done to apply the settings.
Related Information
& “Usage of Manual Mode” on page 80
& “Basic Settings Menu” on page 84
Making Settings for Blocking Junk Faxes
You can block junk faxes.
1.
Select Settings on the home screen on the printer's control panel.
To select an item, use the
u
d
l
r
buttons, and then press the OK button.
2.
Select General Settings > Fax Settings > Basic Settings > Rejection Fax.
3.
Set the condition to block junk faxes.
Select Rejection Fax, and then enable the following options.
❏ Rejection Number List: Rejects faxes that are in the Rejection Number List.
❏ Fax Header Blank: Rejects faxes that have blank header information.
❏ Unregistered Contacts: Rejects faxes that have not been added to the contact list.
4.
Press
button to return to the Rejection Fax screen.
5.
If you are using the Rejection Number List, select Edit Blocked Number list, and then edit the list.
Related Information
& “Basic Settings Menu” on page 84
Making Settings to Send and Receive Faxes on a Computer
To send and receive faxes on a computer, FAX Utility must be installed on the computer connected by network or
USB cable .
Making Save to Computer Setting to Receive Faxes
You can receive faxes on a computer by using the FAX Utility. Install FAX Utility on the computer and make the
setting. For details, see Basic Operations in the FAX Utility help (displayed on the main window).
e setting item below on the printer's control panel is set to Ye s , and the faxes received can be saved on the
computer.
Fax Settings
>
Making Settings Individually for Printer's Fax Features
>
Making Settings to Send and Receive Faxes o
…
82
To Next Page
Loading...
Need help?
General