To Next Page

To Previous Page

XT Series DISK RECORDER - Version 10.01 - Software Technical Reference

Manual

Issue

10.01.D

EVS Broadcast Equipment SA

–

October 2009

1.2.2 TIPS TO MOVE INSIDE THE EVS SOFTWARE

• The active window is always shown with a double frame.

• Use ↑, ↓ and <TAB> keys to change the selection inside the active window.

• Use <SPACE BAR> to toggle between pre- defined values.

• Use ENTER to select an item or to confirm an entry.

• Use ESC to go back to the previous menu or to cancel an entry.

1.2.3 STARTING AN APPLICATION

Select the appropriate application from the Applications list, then press ENTER to

confirm the selection.

1.2.4 COMMANDS AVAILABLE FROM THE MAIN MENU

The ↑ and ↓ keys of the keyboard can be used to select an application. The

purple line shows the current selection. The black line shows the default

application.

The ENTER key is used to start the selected application.

Press F7 to make the currently selected application the new default one. The

default application is automatically started every time the EVS program is entered.

When the application currently selected is already the default application,

pressing F7 will disable the default application and the system will remain in the

EVS Main menu every time the EVS software is entered.

Press F8 to immediately open the Channel Parameters window related to the

selected application. Press ALT + Q to come back to main menu.

Press F9 to enter the Maintenance menu.

To exit the EVS software and go back to the DOS prompt, press simultaneously

ALT + Q and confirm with ENTER. To restart the EVS software from the DOS,

simply type RUN.

EVS XT Series User Manual

Other manuals for EVS XT Series