EVS XT Series User Manual

XT Series DISK RECORDER - Version 10.01 - Software Technical Reference Manual Issue
10.01.D
EVS Broadcast Equipment SA
–
October 2009
13
REC
For a player channel, this parameter defines which record train is the default
source.
For a recorder channel, two parameters are available:
• Recording Capacity: (% Disk) Percentage of disk space allocated to each
channel. Total of all values must not exceed 100%.
• Loop/No Loop: depends on the value of Loop Rec, previously described. Always
forced to “Loop” with the current version.
AUDIO TRACKS
The audio tracks are listed from A1 up to A16:
• A1 to A16 IN: Mono audio inputs of the current channel.
• A1 to A16 OUT: Mono audio output of the current channel.
Audio Format
Possible values: [Analog (A), Digital AES/EBU (D), Dolby E AES (DY), Embedded
(E), Dolby E Embedded (EY)]
The available values depend on the type of audio connectors defined in EVS
hardware configuration:
None 16 XLR
Analog
16 XLR Digital 16 XLR Analog + 8 XLR Digital
16 XLR Analog + 16 BNC Digital
16 XLR Analog + 4 DB15 Digital
4 DB15 Analog + 16 BNC Digital
4 DB15 Analog + 4 DB15 Digital
E - EY E - EY - A E - EY – D - DY E - EY - A – D - DY
Audio Channel
Range: [1 … 64]
This parameter allows selecting each audio channel in the selected audio format.
In 16 audio configurations, the PAGE DOWN and PAGE UP keys make it possible
to navigate through the list of 16 audio channels.

EVS XT Series Specifications

General

Brand	EVS
Model	XT Series
Category	Computer Hardware
Language	English