EasyManuals Logo
Home>EVS>Computer Hardware>XT Series

EVS XT Series User Manual

EVS XT Series
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Issue
10.01.D
XT Series DISK RECORDER
Version 10.01 - Software Technical Reference
EVS Broadcast Equipment SA
October 2009
16
DOLBY CONFIGURATIONS IN XT[2] SERVERS
Case 1: The 5.1 audio signal is carried on 6 discrete PCM audio channels
Available on an XT2 in all configurations
The audio can be analogue, digital or embedded depending on the configuration
In AES audio, if the audio is correctly genlocked to the video, the sample rate
converter can be switched off.
Case 2: The 5.1 audio signal is coded in the two-channels Dolby E
standard
Dolby E over AES/EBU links
o Set the configuration of the pair of channels carrying the Dolby E signal to
“DY” in the AVCFG. This has two effects :
It disables the sample rate converter on the input channels
It forces all transitions to a hard cut.
If the sample rate converter is activated and the audio configuration is a mix
between PCM audio over AES and Dolby E over AES, the sample rate converter
will only be applied to the PCM over AES signal.
Dolby E Embedded in the SDI/HD SDI stream
o Set the configuration of the pair of channels carrying the Dolby E signal to
“EY” in the AVCFG. This will force the transition to a hard cut.
o The sample rate converter parameter does not apply to embedded audio.
The Dolby E transitions will be correct as long as :
the configuration is correct
the AES stream containing Dolby E is correctly synchronised with the video
Dolby E transitions will not
be correct (2 frames of mute at the transitions) if the
AVCFG is set to E instead of EY or D instead of DY.
Audio effects (scrub, slow motion) are not possible in Dolby E. If they are used
anyway, the audio will be muted.
1.3.6 3 D & 1080P DUAL-STREAM MANAGEMENT
PRINCIPLE
The 3D and 1080p features is based on the use of two physical channels
(recorders or players) seen by the server as a logical channel. Consequently, two
physical recorders or players are required but only one is assigned in the
Channels Configuration. These two configurations require the record and playout
on synchronous channels.

Table of Contents

Other manuals for EVS XT Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EVS XT Series and is the answer not in the manual?

EVS XT Series Specifications

General IconGeneral
BrandEVS
ModelXT Series
CategoryComputer Hardware
LanguageEnglish

Related product manuals