EVS XT Series User Manual

Issue
10.01.D
XT Series DISK RECORDER
–
Version 10.01 - Software Technical Reference
EVS Broadcast Equipment SA
–
October 2009
48
If the Configuration File is not Found
A warning message appears:
"Your system is not formatted" "Would you like to
format the system ?".
Answer ‘Yes’ to format the A/V data saved on disks.
Answer ‘No’ to go back to EVS main menu.
If Errors Occur While Reading the Configuration File
The following message appears:
"Error reading configuration file – status = [Err]".
The type of error [Err] can be:
1. Block error A disk error occurred while loading the
configuration file to disks. In this case, the disks
have to be replaced by new ones.
2. Cache overflow error No more memory blocks are available from the
memory cache.
3. Checksum error This error might occur when a disk has been
replaced but the data of this disk is not restored.
For solving the problem, start the Rebuild data
process.
4. Signature error The signature of the configuration file is modified
or the file format is modified and then the file is not
compatible with the microcode. In this case, select
the Format command to correct the error.
If the loading duration of the configuration file is too long, a time-out error
message appears:
"READ CONFIGURATION ERROR: TIMED OUT – state = [ST]".
In this case, reset the system and start again the application.

EVS XT Series Specifications

General

Brand	EVS
Model	XT Series
Category	Computer Hardware
Language	English