EVS XT Series User Manual

Issue
10.01.D
XT Series DISK RECORDER
–
Version 10.01 - Software Technical Reference
EVS Broadcast Equipment SA
–
October 2009
8
BASE CONFIGURATION
Possible values:
Replay-Only LSM
Multicam LSM
XT Server Sony
XT Server DD35
XT Server Odetics
XT Server Odetics F&K
XT Server VDCP
XT Server VDCP F&K
XT Server AVSP
XT Server IPDP
XT SpotBox Sony
XT SpotBox DD35
XT SpotBox Odetics
XT SpotBox Odetics F&K
XT SpotBox VDCP
XT SpotBox VDCP F&K
XT SpotBox AVSP
XT SpotBox IPDP
Video Delay
2-ch VTR
The different configurations appear according to the licence codes that have been
enabled.
Note:
When you select a Spotbox configuration, you can define secondary
controllers by pressing CTRL-F1.
LOOP REC
This parameter enables/disables the endless loop recording in AVSP
Server/Spotbox configurations. It is forced to ‘Yes’ in LSM configurations. This
function is applied to all recorder channels.
CLIP CAPACITY
Possible values: Global / Per Channel
This parameter allows selecting the recording mode.
In Global mode, the clip capacity is shared between the different record trains.
Example: When 3 record trains are used, creating a clip of 30 min on REC1 will
take 10 min of recording capacity equally from each record train.

EVS XT Series Specifications

General

Brand	EVS
Model	XT Series
Category	Computer Hardware
Language	English