EVS XT Series User Manual

XT Series DISK RECORDER - Version 10.01 - Software Technical Reference Manual Issue
10.01.D
EVS Broadcast Equipment SA
–
October 2009
55
3.2 SERVER MONITORING
The first page of the Server Monitoring section makes it possible to monitor the
recording activity and the timecodes on the XT[2] server. It is also used to set up
how the timecodes are managed in the timecode jump tables. It is available by
selecting SHIFT-F5 in Multicam.
3.2.1 DISK STATUS
In this section, the Raid Map indicates the position of the disks on the disk array
and the status of each disk on each existing raid on the right.
/ Disk not present
Dsk! Disk disconnected
OK Disk present
When a disk is disconnected, the message “Rebuild xx.xx%” will appear next to
the disk array to which the disconnected disk belongs. This value shows the
progress of the rebuild process. For more information on the rebuild, please go to
section 0 ‘Disks Monitoring’, on page 42.
3.2.2 GENLOCK STATUS
This section displays the current status of the genlock.

EVS XT Series Specifications

General

Brand	EVS
Model	XT Series
Category	Computer Hardware
Language	English