EVS XT Series User Manual

XT Series DISK RECORDER - Version 10.01 - Software Technical Reference Manual Issue
10.01.D
EVS Broadcast Equipment SA
–
October 2009
29
Net Number
Range: [1 … 29]
The Net Number parameter defines the machine number on the network. This
number is user-defined and must be unique for each system on the network. When
entering a new number if this number is already assigned to another machine, an
error message will warn the user.
Type
Possible values: [Client, Master, Server]
The type defines the privileges of the XT[2] server on the SDTI network. One
XT[2] server on the network should be set to Server type. If no server is defined,
XNet will not be activated. If more than one server is defined, only the first one to
connect will be the actual server.
Other XT[2] servers on the network can be set either to Master type if they need to
access clips from other servers, or to Client type if their clips must be available on
the network but they don’t need to access clips from other servers.
Allowed to access the content
of all XT[2] servers on the
network
Can be accessed by other XT[2]
servers on the network
SERVER Yes Yes
MASTER Yes Yes
CLIENT No Yes
DB Size
Possible values: [32000 clips]
This parameter defines the size of the network database, i.e. the maximum number
of clips that can be created for the entire SDTI network.
VIDEO & AUDIO AREA
Std
This parameter allows selecting the video standard:
• 625i 50.00 PAL (default for SD)
• 525i 59.94 NTSC
• 525i 59.94 NTSC Japan
• 1080i 50.00 PAL (default for HD)

EVS XT Series Specifications

General

Brand	EVS
Model	XT Series
Category	Computer Hardware
Language	English