Printing Basics 123
Linking Trays
When the optional 550 sheet feeder is installed on the printer, the printer automatically links the trays when you load
the same size and type of print media in them. The first tray will be utilized until the media runs out after which the
next tray will be used.
NOTE:
• The print media should be the same size and type in each tray.
• The bypass tray cannot be linked to any of the tray.
After loading the selected trays with the same size and type of print media, select the Paper Type setting in the
Tray Settings menu for each tray.
To disable tray linking change the paper type in one of the trays to a unique value.
NOTE:
• If different types of print media of the same size are loaded in each tray, the printer will automatically link them if the paper
type is not specified in the print driver properties/preferences.
To Next Page
Loading...
Need help?
General
