Fuji Xerox DocuPrint CP405 d User Manual

Maintenance 263
Removing the Fusing Unit
1 Turn off the printer, and wait for 30 minutes.
IMPORTANT:
• If the optional hard disk unit is not installed on your printer, note that the data in the memory are cleared when the printer
is turned off.
2 Push down the latch to open the rear cover.
3 Grasp the grips on both sides of the fusing unit with the lever under the left side grip squeezed, and then pull
out the unit.

Fuji Xerox DocuPrint CP405 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CP405 d
Category	Printer
Language	English