170 Using the Operator Panel Menus
• Wireless Setup
NOTE:
• Wireless Setup is available only when the printer is connected using the wireless network.
Purpose:
To configure the wireless network using WPS.
Values:
Select access Select the desired access point
from the list, or select Manual
Setup to specify and configure
wireless network manually.
WEP Key Displayed when the selected
access point uses the security
method of WEP. Specify the
WEP key of 10 or 26
hexadecimal characters.
The transmit key is set to Auto.
PassPhrase Entry Displayed when the selected
access point uses the security
method of WPA-PSK-TKIP or
WPA2-PSK-AES. Specify the
pass phrase of 8 to 63
alphanumeric characters.
Manual
Setup
Enter (SSID) Specify a name to identify the
wireless network. Up to 32
alphanumeric characters can be
entered.
Network
Mode
Infrastructure Select to configure the wireless
setting through the access point
such as a wireless router.
Encryption
Type
No Security Specify No Security to
configure the wireless setting
without specifying a security
method from Mixed mode PSK,
WPA-PSK-TKIP,
WPA2-PSK-AES, and WEP.
Mixed mode PSK Specify Mixed mode PSK to
automatically select an available
encryption method from
WPA-PSK-TKIP or
WPA2-PSK-AES.
To Next Page
Loading...
Need help?
General
