Using the Operator Panel Menus 183
• Adjust ColorRegi
Purpose:
To manually perform color registration adjustment.
manual color registration adjustments are required when the printer is initially installed and after the printer is moved.
NOTE:
• The Adjust ColorRegi feature can be configured when Auto Adjust Regi is set to Off.
Values:
NOTE:
• Ensure that you remove the paper from the bypass tray before performing Auto Adjust.
• Initialize NVM
Purpose:
To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all the menu
parameters, except the parameters for the network, are reset to their default values.
See also:
• "Resetting to Factory Defaults" on page 194
• Init Print Meter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to zero.
• Reset Trans Unit
Purpose:
To initialize the life counter of the transfer unit. After replacing the transfer unit, be sure to initialize its life counter.
• Clear JobHistory
Purpose:
To clear the job history of all finished jobs.
Auto Adjust Automatically performs color registration correction.
ColorRegi Chart Prints a color registration chart. The color registration chart prints a lattice
pattern of yellow, magenta, and cyan lines. On the chart, find the values on
the right side that are next to the line that is perfectly straight for each of
the three colors. If the value for this line is 0, color registration adjustment
is not required. If the value for this line is any value other than 0, specify
the adjustment values for lateral adjustment and process adjustment under
Enter Number.
Enter Number LY -12 to +12 Sets lateral (perpendicular to paper feed direction) and process (paper
feed direction) color adjustment values individually for Yellow, Magenta,
and Cyan. Enter a number in order of lateral adjustment (left), lateral
adjustment (right), and process adjustment. Press the
button to save
all the settings.
LM
LC
RY -12 to +12
RM
RC
PY -12 to +12
PM
PC
To Next Page
Loading...
Need help?
General
