182 Using the Operator Panel Menus
• Adjust FusingUnit
Purpose:
To adjust the fusing temperature setting for each paper type.
The default settings may not give the best output on all paper types. When the printed paper has curled, try to lower
the temperature. When the toner does not fuse on the paper properly, try to increase the temperature.
NOTE:
• The print quality changes depending on the setting values you select for this item.
Values:
• Auto Adjust Regi
Purpose:
To specify whether to automatically perform color registration adjustment.
Values:
Plain 0
*
-3 to +3
Light Card 0
*
-3 to +3
Heavy Card 0
*
-3 to +3
LW Gloss Card 0
*
-5 to +10
HW Gloss Card 0
*
-5 to +10
Labels 0
*
-3 to +3
Envelope 0
*
-3 to +3
Off Does not
automatically perform color registration adjustment.
On
*
Automatically performs color registration adjustment.
To Next Page
Loading...
Need help?
General
