222 Troubleshooting
Ghosting
Light-Induced Fatigue
Problem Action
The printed result has ghosting. If the type of the ghosting is positive ghost:
Replace the drum cartridges if you have spare cartridges.
See also:
• "Replacing the Drum Cartridges" on page 256
• "Installing the Drum Cartridges" on page 259
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
If the type of the ghosting is negative ghost:
Verify that the print media recommended for the printer is being used.
If you are using non-recommended print media, use the print media recommended
for the printer.
If the problem is solved, adjust the transfer bias.
If the problem persists, replace the drum cartridges if you have spare cartridges.
Adjust the transfer bias.
1 On the operator panel, press the (Menu) button and select Admin Menu →
Maintenance Mode → Adjust BTR.
2 Adjust the setting for the type of print media being used.
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
Problem Action
The printed result has
light-induced fatigue pattern.
Replace the drum cartridges if you have spare cartridges.
See also:
• "Replacing the Drum Cartridges" on page 256
• "Installing the Drum Cartridges" on page 259
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
To Next Page
Loading...
Need help?
General
