Preparing y ou r notebook for use
Switching the notebook on for the first time (devices
with pre-installed Windows o
perating system)
Switchingonforthefirst time
We recommend that the notebook is supplied with power through
the m ains adapter during this procedure.
When you switch your notebook on for the first time, the s upplied software is
installed and configured. D ue to the fact that this installation procedure must not
be interrupted, you should set aside enough time for it to be fully completed and
connect the notebook to the mains outlet using the mains adapter.
During installation, the notebook must only be rebooted when you are reque sted to do so!
You will be prompted to create a backup copy of the pre-installed operating system. This
backup copy can be used later to restore your noteboo k to its delivery con figuration.
You can find information on how to restore the operating system, drivers, manuals
and special software in the Recovery Process manual.
Your operating system is pre-installed on the hard disk to facilitate the procedure
when you use your notebook for the first tim e.
► Switch the notebook on (see "Notebook switching on", Page 11).
► During installation, follow the on-screen instructions.
Consult the operating system manual if anything is unclear about the requested input data.
If a Windows operating system is installed on your notebook, you will find additional
information on the system as well as the drivers, help programs, updates, manuals, etc.
on your notebook, or you can order it via our website (see "
Information sources", Page 4).
10 A26391-K90-Z200-1-7619, edition 1
To Next Page
Loading...
Need help?
General