95
5.5 [Network Settings]
[SMTP Server Settings]
Enables confirmation of the connection situation between the machine and SMTP server by tapping
on [Connection Test] and sending a test Email to an Email address specified by the machine. Also, if
[Connection Test] > [Print SMTP Comm Report] is selected, a report is printed showing the specifics
of the SMTP communication protocol sent/received by the machine.
Item Description
[SMTP Server Name / IP
Address]
Input server name or IP address of SMTP server.
[SMTP Server Port Number] Sets port number of SMTP server.
[Email Send Authentication] Sets method of authentication for sending via SMTP.
Note
As authentication methods, the system supports AUTH GSSAPI (only
when specifying Kerberos), AUTH NTLMv2, AUTH NTLMv1, AUTH
PLAIN, AUTH LOGIN, and AUTH CRAM-MD5.
[Login Credentials for Email
Send]
Sets Login Credentials for Email Send.
If set to [Remotely Authenticated User], login to the SMTP server is
performed with the remote authentication user name/password if
log in to remote accounts is performed on the machine prior to
running a job. You can also select Operation in case login fails. If log
in to remote accounts is not used, then the user name/password set
for the machine is used.
[SMTP AUTH Login Name] Sets login name for SMTP server.
[SMTP AUTH Password] Sets login password for SMTP server.
To Next Page
Loading...
Need help?
General
