94
5 Device
[EP Proxy Server Setup]
Sets settings for proxy server for EP connection, when using the EP system for EP-BB multifunction
device management service via the Internet.
This is the same as [Proxy Server List].
There are countries and regions where the EP-BB multifunction device management service is not
available.
Refer to our official website for information on the EP-BB multifunction device service.
[Outgoing/Incoming Email Settings]
[POP3 Server Settings]
You can set the POP3 server of Exchange Online which uses Oauth2.0 authentication using Internet
Services.
You can set only one POP3 server. The settings you made later takes effect.
If you set the POP3 server of Exchange Online which uses Oauth2.0 authentication, the setting of this
item is not used.
Item Description
[Server Name / IP Address] Input server name or IP address of POP3 server.
[Port Number] Sets port number of POP3 server.
[Polling Interval] Sets interval for checking POP3 server for Email.
[Login Name] Input name for logging in to POP3 server.
[Password] Sets password for POP reception.
[POP Password Encryption] Enables password encryption.
To Next Page
Loading...
Need help?
General
