Fujitsu ApeosPrint C4030 User Manual

93
5.5 [Network Settings]
[Proxy Server Settings]
Proxy server settings can be set for each interface, in accordance with the network environment.
Note

If you use multiple interfaces, this item is displayed [Proxy Server Settings - Ethernet 1]/[Proxy Server
Settings - Wi-Fi].
Item Description
[Use Proxy Server] Enables use of proxy server.
[Proxy Server Setup] Sets method of specifying proxy server.

[Same Proxy for All Protocols]
Settings for HTTP proxy server are also applied to HTTPS proxy
server.

[Different Proxy for Each Protocol]
Enables different settings for HTTPS proxy server and HTTP proxy
server, respectively.

[Use Automatic Proxy Configuration Script]
Setting is done by using PAC file for setting HTTPS proxy server
and HTTP proxy server.

[Automatically Detect Settings]
Detects settings for HTTPS proxy server and HTTP proxy server.
[Enter URL to Configuration
Script]
Specifies URL when setting [Proxy Server Setup] to [Use Automatic
Proxy Configuration Script].
[Address to Bypass Proxy
Server]
Sets addresses for not using a proxy server. Specification can be
done with IPv4 address, IPv6 address, and FQDN format.
Specification can also be done using “*” (wild card).
[HTTP Proxy Server Name]/
[HTTPS Proxy Server Name]
Input server name or IP address. Specification can be done with IPv4
address, IPv6 address, and FQDN format.
[HTTP Proxy Server Port
Number]/[HTTPS Proxy
Server Port Number]
Specifies port number of HTTP proxy server and HTTPS proxy server.
[HTTP Proxy Server
Authentication]/[HTTPS
Proxy Server
Authentication]
Set to [Enabled] if authentication is necessary when connecting to
an HTTP proxy server or HTTPS proxy server.
[HTTP Proxy Server Login
Name]/[HTTPS Proxy Server
Login Name]
Input the login name.
[HTTP Proxy Server
Password]/[HTTPS Proxy
Server Password]
Input password.

Fujitsu ApeosPrint C4030 Specifications

General

Brand	Fujitsu
Model	ApeosPrint C4030
Category	Printer
Language	English