Appendix
Problem Possible Cause Possible Solution
The WLAN device was
deactivated or is d isabled
Check if the wire less switch
is turned On. Go to
Start >
Control Panel
, and doubleclic
k
on
Windows Mobility Center
.If
the wireless network is off, c
lick
the
Turn wireless on
button.
The comput er to b e connect
ed
is turned off
Check if the computer to be
connected is turned ON.
Incorrectly con¿gured network
settings
Recheck the con¿guration of
your network settings.
RF interference fro m Ac
cess
Points or other wireles
s
networks
The use of ident ical or
overlapping RF channel
scan
cause interference wi
th the
operation of the WLAN d
evice.
Change the channel o
fyour
Access Point to a cha
nnel
that does not overla
p with the
interfering devic
e.
Wireless network
authentication
has failed
Re-check your Net
work
Authentication,
Encryption,
and Security sett
ings.
Incorrectly con
¿gured
security setti
ngs such as
an incorrectly
typed WEP
key, a mis-con
¿gured LEAP
username, or a
nincorrectly
chosen authen
tication method
will cause th
e LAN device to
associate bu
t not authenticate
to the wirele
ss network.
Unavailable network connection
(continued)
Incorrect I
P address
con¿gurat
ion
This only ap
plies to networks
using stat
ic IP addresses.
Please con
tact your network
administ
rator for the correct
settings
.
Using the Bluetooth Device
BluetoothisintegratedintotheWirelessLANmodule.TheBluetoothcapabilitiesareBluetooth
Basic, EDR and Bluetooth Low Energy (BT v.0) operational modes.
What is Bluetoot h?
Bluetoothte chnologyis usedto connectmobile deviceto oneothe r overa shortdistance,
suchas Ta b let PCs, phones, printersandcameras. WithBluetooth
technology, personal
areatechnologies(PANs) are generated between devices in the vicinity.
100 Fujitsu
To Next Page
Loading...
Need help?
General