First-time setup of your device
Choosealocation
Choosealoc ationSetupACada pter
Choose a s uitable location for the device before setting it u p. In doing
so, please follow these instructions:
• Never place the device or the AC adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can result in damage caused by overheating.
• The back of the device heats up during normal operation. Prolonged contact
with skin can become unpleasant or even result in burns.
• Place the device on a stable, Àat, non-slippery surface. Please note that the
rubber feet of the device may ma rk certain types of delicate surfaces.
• Keep other objects at least 100 mm / 3.94 inches awa y from the device
and its AC adapter to ensure adequate ven tilation.
• Do not expose the device to extreme environmental conditions. Protect
the device against dust, humidity and heat.
Connecting the AC adapter
MakingreadytouseACadapter
Please follow the
safety notes in section "
Import ant notes", Page 13.
The supplied AC c
able conforms to the requirements of the country in which
you purchased yo
ur device. Make sure that the AC cable is approved for
useinthecount
ry in which you intend to use it.
3
1
2
Ź Connect the AC cable (1) to the AC ada pter.
Ź Plug the AC cable (2) into a power outlet.
Ź Connect the AC adap ter cable (3) to the
DC jack (DC IN) of the device.
Fujitsu 19
To Next Page
Loading...
Need help?
General