Tro ubleshooting and tips
Stylus input not working
Cause
Troubleshooting
Incorrect driver installed.
Ź
Reinstall the driver for the "dual digitizer".
The Tablet PC does not start after switch on
Tab le tP C
Cause Troubleshooting
The battery is dead.
Ź Charg e the battery.
or
Ź Connect the AC adapter to the Tablet
PC.
The AC adapter is not connected properly. Ź Check whethe r the AC adapter is properly
connected to the Tablet PC .
Ź Switch the Tablet PC on.
The Tablet PC stops working
Tab le tP CEnding
Cause Troubleshooting
The Tablet PC is in energy saving mode.
Ź End energ y saving mo de.
An application program has caused the
malfunction.
Ź Close the application program or restart
the Ta blet PC (by restarting the operating
system or switching the device off and back
on again).
The battery is dead.
Ź Charg e the battery.
or
Ź Connect the AC adapter to the Tablet
PC.
The printer does not print
Printerdoes notprint
Cause Troubleshooting
The printer is not s witched on. Ź Make sure that t he printer is switch ed
on and ready for operation (refer to the
documentation supplied with the printer).
The printer is not connected correctly.
Ź Check t
hat the data cable between the Tablet
PC and t
he printer is prope rly connected.
The printer driver is faulty o r n ot c orrectly
installed, or it is th e wrong printer driver.
Ź Check that the data cable betwee n the Tablet
PC and the printer is properly c onnected.
Ź Check whether th e correct printer driver is
loaded (refer to the printer documentation).
Fujitsu 79