Connecting external devices
USBportwithchargingfunction(USBType-C)
USBportwithchargingfunction(USBType-C™)
You can also charge a connected USB device or operate devices without an
additional power supply at this USB por t.
This is also possible with the Tablet PC switched off, if the
USB Type-C Power Delivery on System Off
function is activated in the
Advanced - Miscellaneous Configurations
menu of the
BIOS Setup Utility
.For
how to call up and use the
BIOS Setup Utility
,seeSection"
Settings in BIOS Se tup Utility", Page 72.
USB devices are hot-pluggable. This means you can connect and disconnect the
cables of USB devices while the operating system is running.
Additional information can be found in the documentation for the USB devices.
+
Ź Connect the data cable to the
external device.
Ź Connect the data c able to a USB port
(USB Type-C) on the Tablet PC.
How to remove USB devices correctly
Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.
Ź Tap the symbol for safe removal of the hardware.
Ź Select the device you wish to shut down and remove.
Ź Tap OK.
Wait for the dialog box which te lls you that it is now safe to remove the device.
70 Fujitsu
To Next Page
Loading...
Need help?
General