4. GENERAL SETUP
4-6
4.12 Soft Keys
This section shows you how to set up the soft keys. You can select the number of soft
keys to use, program the soft keys and select how long to show the soft key icon after
a soft key is pressed.
4.12.1 Transceiver unit
1. Press and hold down the CALL/MENU key until the [Setup Menu] appears.
2. Select [General Setup] with the CH knob then press the [SELECT] soft key.
3. Rotate the CH knob to select [Soft Keys] then press the [SELECT] soft key.
4. Rotate the CH knob to select [Number of Soft Keys]
then press the [SELECT] soft key.
5. Rotate the CH knob to select the number of soft keys
(3 through 10) to use then press the [ENT] soft key.
6. Rotate the CH knob to select [Key Assignment] then
press the [SELECT] soft key (to assign the use of selected soft keys).
7. Rotate the CH knob to select the key ([Key 1], [Key 2],
[Key 3], etc.) then press the [SELECT] soft key.
8. Rotate the CH knob to select a new function then
press the [ENT] soft key. See the table below for func-
tions.
9. Press the [QUIT] soft key.
10. Rotate the CH knob to select [Key Timer] then press the [SELECT] soft key. [Key
Timer] sets how long to display a soft key icon after a soft key is pressed.
11. Rotate the CH knob to select the time then press the [ENT] soft key to store the
selected setting.
12. Press the [QUIT] soft key several times to return to radio operation.
Function Description
[DIMMER] Selects the menu for the display and key back light intensity.
[SCAN] Starts and stops scanning.
[DW] Starts and stops dual watch scan.
[IC] Activates Intercom between radio and HS-4721 Handset.
[PA/FOG] Activates the PA / foghorn function.
[PRESET] Programs or deletes the preset memory channel.
[SCRAMBLER] Activates the voice scrambler.
Select Key Assignment;
press [SELECT] soft key.
Select Key Timer;
press [SELECT] soft key.
To Next Page
Loading...
Need help?
General
