6-1
6. ATIS SETUP
The FM-4721 supports the ATIS (Automatic Transmitter Identification System) used
in Inland waterways in Europe. When enabled, the ATIS mode transmits a unique
ATIS code each time the microphone's PTT switch is released at the end of a trans-
mission. Users should check with their local marine regulatory authority in their coun-
try for assistance in obtaining an ATIS code. "ATIS" appears on the display when the
ATIS mode is active.
6.1 ATIS Code Programming
1. Press and hold down the CALL/MENU key until the [Setup Menu] appears.
2. Rotate the CH knob to select [ATIS Setup] menu then press the [SELECT] soft
key.
3. Select [ATIS Code] with the CH knob then press the
[SELECT] soft key.
4. Press applicable keys to enter your ATIS (ten digits). (If
you made an error when you entered the ATIS, press
the [BACK] soft key until the wrong number is selected,
then press the correct numeric key.)
5. Press and hold the [ENT] soft key. The radio asks you
to input the ATIS number again. Do step 4 above to en-
ter the number again. Press and hold the [ENT] soft
key.
6. Enter the number. Press the [OK] soft key to store the
ATIS number in the memory.
7. Press the [QUIT] soft key several times to return to ra-
dio operation.
To Next Page
Loading...
Need help?
General
