6. ATIS SETUP
6-2
6.2 ATIS Channel Group
The FM-4721 has the capability to turn on and off the ATIS feature for each channel
Group call but operator must select only INTL channel group.
1. Press and hold down the CALL/MENU key until the [Setup Menu] appears.
2. Rotate the CH knob to select [ATIS Group] menu then press the [SELECT] soft
key.
3. Rotate the CH knob to select [Group] then press the
[SELECT] soft key.
4. Rotate the CH knob to select the channel Group call
you wish to change the setting then press the [ENT]
soft key.
5. Rotate the CH knob to select [On] or [Off].
6. Press the [ENT] soft key to store the selected setting.
7. Press the [QUIT] soft key several times to return to radio operation.
To Next Page
Loading...
Need help?
General
