Garmin G1000 Maintenance Manual

____________________________________________________________________
Page 5-8 G1000 System Maintenance Manual
Rev. A 190-00903-00
5.1.3 System Status Page Failure Indications
The System Status Page in the AUX group of pages displays the status for all detected LRUs.
Active LRUs are indicated by green check marks and failed LRUs are indicated by red “X”s.
Figure 5-2. System Status Page (AUX Group)
5.1.4 Data Path Failure Messages
In addition to LRU failure annunciations, data path messages can also be used to help identify a
faulty LRU. The following message indicates that a data path connected to the GDU (MFD or
PFD) or the GIA 63/GIA 63W (1 or 2) has failed.
'FAILED PATH – A data path has failed. Check configuration mode'
The failed path message is triggered by the timeout of a digital channel. The channels that are
checked are displayed on these configuration pages:
1. Main GDU RS-232/ARINC 429 Configuration Page (PFD1/2, and MFD) (Figure 5-3).
2. GIA RS-232/ARINC 429 Configuration Page (GIA1 and GIA2) (Figure 5-4).
3. GIA RS-485 Configuration Page (GIA1 and GIA2) (Figure 5-5).
Once the failed path message is displayed, it remains on the list of messages until the next power
cycle.

Garmin G1000 Specifications

General

Display Type	LCD
Primary Flight Display (PFD)	Yes
Multi-Function Display (MFD)	Yes
Terrain Awareness	Yes
Autopilot Integration	Yes
Integrated Flight Deck System	Yes
Weather Radar	Optional
Traffic Advisory System (TAS)	Optional
Terrain Awareness and Warning System (TAWS)	Yes
Resolution	1024 x 768 pixels
Weather Data	Yes
Navigation	Yes
AHRS	Yes
Air Data Computer (ADC)	Yes
Interfaces	ARINC 429, RS-232
Certification	TSO certified
Traffic Information	Optional (requires ADS-B or TCAS)