Electromagnetic compatibility (EMC): Electromagnetic compatibility (EMC)
2000966-542D Dash 3000/4000/5000 A-7
Compliant cables and accessories
CAUTION
The use of accessories, transducers and cables other than
those specified may result in increased emissions or
decreased immunity performance of the equipment or
system.
The table below lists cables, transducers, and other applicable
accessories with which GE EMC compliance.
NOTE:
Any supplied accessories that do not affect EMC compliance are not
included.
Category Description Maximum length
ECG cables
Multi-Link 12-Ld ECG Standard Cable 3.6 m / 12 ft
Multi-Link 5-Ld ECG Standard Cable 6 m / 20 ft
Multi-Link 3-Ld ECG Neonatal Cable 3.6 m / 12 ft
Multi-Link 3-Ld ECG Cable w/Grabber 3.6 m / 12 ft
Multi-Link 5-Ld ECG ESU 3.6 m / 12 ft
Multi-Link, 3/5-Ld ECG Cable 3.6 m / 12 ft
Multi-Link 3-Ld Neonatal ECG Cable 3.6 m / 12 ft
Multi-Link 3-Ld ECG Cable w/Grabber 3.6 m / 12 ft
Multi-Link 6-Ld ECG Cable 3.6 m / 12 ft
Multi-Link 12 SL ECG Cable 3.6 m / 12 ft
Multi-Link 3/5/6 Adapter N/A
Multi-Link to 300-Series 3-Ld Trunk Cable 3 m / 10 ft
Multi-Link to 300-Series 5-Ld Trunk Cable 3 m / 10 ft
ECG Multi-Link lead wires
Multi-Link lead wire Set-Group, 5-Ld, Grabber 130 cm / 51 in
Multi-Link lead wire Set-Group, 3-Ld, Grabber 130 cm / 51 in
Multi-Link lead wire set, 5-Ld, Grabber 130 cm / 51 in
Multi-Link lead wire set, 5-Ld, Grabber V2-V6 130 cm / 51 in
Multi-Link lead wire set, 3-Ld, MiniGrab AHA Ld I 74 cm / 29 in
Multi-Link lead wire set, 3-Ld, MiniGrab IEC Ld I 74 cm / 29 in
To Next Page
Loading...
Need help?
General
