GE NetworX V3 User Manual

NetworX Version 3 Installation Manual
69
4. Enter 5 and press OK.
5. The keypad beeps once to confirm the change and returns to Internal Siren Timeout.
Configuring system features
You can specify various system features, enable the tests that can be performed on the control panel
and set clock options. The following example programs the control panel to activate the siren and
make a manual test call to the central station during the do self tests.
1. Ensure the advanced menu is enabled.
2. Navigate with the ½¾ keys to Control Panel>System Settings>Feature Select and press
OK.
3. Scroll to Diagnostics>Manual Siren Test>Enabled and press OK.
4. The keypad beeps once to confirm the change and returns to Manual Siren Test.
5. Scroll to Manual Dialer Test>Enabled and press OK.
6. The keypad beeps once to confirm the change and returns to Manual Dialer Test.
Setting arm schedules
Figure 22. Arm Schedules menu
The control panel can be programmed to automatically disarm (open) and arm (close) partitions at
specified times on specified days. To program auto-arm schedules, you must enable the advanced
Arm Only After Close
(1) Partition 1
Schedule Times
Auto Arm
Closing/Autoarm
Opening
(1) Partition 1
2.7.1
2.7.2
2.7.4
2.7.1.1
2.7.2.1
2.7. .14
2.7. .24
2.7.1.1.1
2.7.1.1.2
2.7.1.1.3
2.7.1.1.4
2.7.1.1.5
2.7.1.1.6
2.7.1.1.7
2.7.2.1.1
2.7.2.1.2
2.7.2.1.3
2.7.2.1.4
2.7.2.1.5
2.7.2.1.6
2.7.2.1.7
2.7.2.1.8
2.7. .1.14
2.7. .1.24
2.7. .2.14
2.7. .2.24
Hour
Minute
Sunday
Monday
Tu e s day
Wednesday
Thursday
Friday
Saturday
Hour
Minute
Sunday
Monday
Tu e s day
Wednesday
Thursday
Friday
Saturday
45 Minute Retry
Partitions 2 -
Same as above
4
Partitions 2 -
Same as above
4
Auto Disarm
(1) Partition 1
2.7.3
2.7. .132.7..1.13
2.7. .1.23
2.7. .1.33
2.7. .1.43
2.7. .1.53
2.7. .1.63
2.7. .1.73
Partitions 2 -
Same as above
4
Sunday
Monday
T
uesday
Wednesday
Thursday
Friday
Saturday

GE NetworX V3 Specifications

General

Brand	GE
Model	NetworX V3
Category	Security System
Language	English