D
IRECTION 5771498-100, REVISION 6 VENUE™ SERVICE MANUAL
1-20 Section 1-1 - Overview
PRELIMINARY
Section 1-7
Product Labels and Icons
The Venue™ ultrasound scanner comes equipped with product labels and icons. These represent
pertinent information regarding the operation of the unit.
1-7-1 Universal Product Labels
NOTE: The following diagrams illustrate the labels found on the Venue™ ultrasound unit. For an explanation
of label icons and symbols, refer to Table 1-3 on page 1-23.
A system Rating Label (examples shown in Figure 1-3 and Figure 1-4, below) is located at the rear of
the system. This indicates the ultrasound unit’s basic power compliance. In addition, a General Label
(Figure 1-6 and Figure 1-7, below) provides details regarding regulatory compliance - as well as
warnings and cautions.
Figure 1-3 Rating Label - Venue™ (100-240V) International - R1
.
Figure 1-4 Rating Label - Venue™ (100-240V) International - R2
NOTE: The Serial Number format for Venue R1 is XXXXXXVENUE.
For Venue R2: VEBXXXXXX .
For Venue R1 upgraded to R2: VEAXXXXXX.
To Next Page
Loading...
Need help?
General
