EasyManuals Logo
Home>GE>Medical Equipment>Venue R1

GE Venue R1 Service Manual

GE Venue R1
478 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #390 background imageLoading...
Page #390 background image
8-170 Section 8-8 - Peripherals Replacement/Installation Procedures
D
IRECTION 5771498-100, REVISION 6 VENUE™ SERVICE MANUAL
PRELIMINARY
8-8-2 Wi-Fi Adapter Replacement/Installation Procedure
8-8-2-1 Tools
Appropriate Phillips screwdriver
8-8-2-2 Time Required
15 min
8-8-2-3 Preparations
1.) Shut down the Venue™ ultrasound unit, as described in Power Shut Down .
2.) Make sure the On/Off power switch is set to Off.
3.) Make sure the system is standing securely on a level surface, with the wheels in the locked position.
8-8-2-4 Wi-Fi Adapter Removal Procedure
NOTE: Perform these steps only for Venue™ systems with Wi-Fi adapter already installed on them.
For systems with no previously installed Wi-Fi adapter skip this section and proceed to section
Wi-Fi Adapter Installation Procedure (For Systems with No Existing Wi-Fi Adapter)
1.) On the back of the cockpit, release four screws and remove the transparent Wi-Fi dongle cover.
2.) Disconnect the Wi-Fi dongle.
FRU Part #
Refer to Table 9-19 on page 9-18.
Figure 8-181 Wi-Fi Cover and Dongle Removal

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE Venue R1 and is the answer not in the manual?

GE Venue R1 Specifications

General IconGeneral
BrandGE
ModelVenue R1
CategoryMedical Equipment
LanguageEnglish

Related product manuals