Hardi HC 8500 User Manual

4 - System setup
4.86
New Pattern - SmartPath
The SmartPath™ pattern is designed to give guidance from any
previously-driven pass. This is used in irregular-shaped and
terraced fields where you cannot run all passes parallel to the
previous pass.
Instead, the SmartPath guidance allows you to move to a different
area of the field, and then resume a previous guidance pattern
later.
Moreover, you can use SmartPath to create straight AB patterns
within the SmartPath pattern and cycle between any available
pattern within SmartPath to choose the appropriate one.
Select SmartPath
System defaults pattern type to last used. Press the pattern icon to select a different pattern.
• Implement Width (from Implement Setup)
• Guidance Width input box
Press . You will automatically return to the Map screen.
Inputting Paths into SmartPath
AB Manager
The AB Manager screen allow user to create, edit, remove, and load paths into SmartPath.
• Press to create an AB line.
• Press to load an AB line.
• Press to edit the name of an AB line.
• Press to delete an AB line.
You can create up to 10 different AB lines within SmartPath.
• Press the Back button to close the screen.
New
Pattern
Load

Hardi HC 8500 Specifications

General

Brand	Hardi
Model	HC 8500
Category	Controller
Language	English