4.1
4 - System setup
Installation
Installation Instructions
All machine installation and mounting kits are shipped with instructions specific to that kit. Instructions include special
details relating to mounting, wiring and display configuration.
Mount the display to a secure support inside the vehicle cab. When choosing a mounting location, consider if the display:
• is readily accessible to the machine operator.
• does not obstruct the machine operator's normal driving view.
• does not interfere with or limit access to any of the existing machine controls.
• is fitted so the ISOBUS system cabling is routed and secured without interfering with existing machine controls.
±
WARNING! If drilling holes is required during the mounting process, care must be taken to ensure that damage is not
done to existing vehicle wiring, mechanical, or cab structure. Refer to vehicle manufacturer documentation for
specific details on your equipment. Follow all OEM instructions, cautions, and warnings when working around
equipment.
Components of Ram mount kit (HARDI® Part # 72802400):
A. RAM Base
B. RAM Arm
C. Base
To Next Page
Loading...
Need help?
General
