Hardi HC 8500 User Manual

5 - Operation
5.21
Finalize Event
During a field operation, you can suspend or close the event by pressing on the wrench at the end of the Grower Farm Field
(Select Event) button.
This opens the Events Options screen.
The Event Options screen allows operator to
change:
• Event Name.
Select the event to be edited in the drop
down menu. An active event will be
preselected when the Event Options screen
is opened.
• Suspend Event.
Pressing this button suspends the current
field operation. The Home screen then
appears as before the creation of a field
operation, as shown on “Home Screen” on
page 4.15.
• Clear Map Bounds.
Press to clear map bounds for the selected
event.
• Close Event.
Pressing this button ends the current field operation. The Home screen then appears as before the creation of a field
operation, as shown on “Home Screen” on page 4.15.
A closed event cannot be re-opened and will not show up in the Event Selection screen. A user can manually close
Events or be prompted to close events.
• Prompt to Close Events.
Check this to be prompted before an event is accidentally closed.
Event:
Grower:
Farm:
George Eilers
Sheldon
Field: Orab
Event Options
Suspend
Event
Clear Map
Bounds
Close
Event
Prompt to
Close Events
Event Name

Hardi HC 8500 Specifications

General

Brand	Hardi
Model	HC 8500
Category	Controller
Language	English