HIKVISION DS-2TD2637T-7/P User Manual

Above (be colored)
When the target of high temperature needs to be colored, you can set the high temperature
color. Target above the seng temperature will be displayed in seng color.
Between (be colored)
When the target of an interval temperature needs to be colored, you can set the interval
temperature color. Target between the minimum and the maximum temperatures will be
displayed in
seng color.
Below (be colored)
When the target of low temperature needs to be colored, you can set the low temperature
color. Target below the seng temperature will be displayed in seng color.
5.
Click Save.
5.2.14 DDE
Digital Detail Enhancement is used to adjust the details of the image. OFF and Normal modes are
selectable.
OFF
Disable this
funcon.
Normal
Set the DDE level to control the details of the image. The higher the level is, the more details
shows, but the higher the noise is.
5.2.15 Brightness Sudden Change
When the brightness of target and the background is hugely dierent (the temperature dierence
of target and background is huge), the system reduces the dierence for viewing.
5.2.16 Enhance Regional Image
You can select the desired area of image to improve the coding quality. The regional image will be
more detailed and clear.
Steps
1.
Go to Conguraon → Image → Display Sengs → Image Enhancement .
2.
Select the area of regional image enhancement. You can select OFF to disable this
funcon, or
select Custom Area to draw a desired area.
A red rectangle shows on the display, in which the image quality is improved.
Thermal Opcal Bi-spectrum Network Camera User Manual
32

HIKVISION DS-2TD2637T-7/P Specifications

General

Brand	HIKVISION
Model	DS-2TD2637T-7/P
Category	Security Camera
Language	English