MAINTENANCE
7-17
B. ENGINE
Engine Oil --- Level check daily
(Check before starting the engine.)
Check the oil level every day before starting the
machine. Oil level must be between the marks on oil
level gauge (1). If necessary, add the specified en-
gine oil via oil filler (2). Re-check the oil level after
refilling.
Change Engine Oil --- every 250 hours
Replace Engine Oil Filter --- every 250 hours
WARNING: Each component of the engine may
be hot immediately after operation. Allow com-
ponents to cool before starting to work on them.
1. Prepare a 10-liter (2.6 US gal) container to receive
the drain oil.
2. Remove drain plug (4) from engine oil pan (3) to
drain the oil.
3. Allow oil to drain through a clean cloth to check if
any debris such as small pieces of metal are pre-
sent on the cloth.
4. After all oil has drained, re-Install and tighten drain
plug (4).
Wrench size : 17 mm
Tightening torque : 29.4 N⋅m (3 kgf⋅m, 22 lbf⋅ft)
M1MS-07-009
M104-07-010
M1MS-07-010
Oil Pan
Clean Cloth
Con
aine
1
2
3
4