SAFETY
S-14
AVOID TIPPING
• The danger of tipping is always present when operating
on a grade, possibly resulting in serious injury or death.
To avoid tipping:
• Be extra careful before operating on a grade.
• Prepare machine operating area flat.
• Keep the bucket low to the ground and close to the
machine.
• Reduce operating speeds to avoid tipping or slipping.
• Avoid changing direction when traveling on grades.
• NEVER attempt to travel across a grade steeper than
15 degrees if crossing the grade is unavoidable.
• Reduce swing speed as necessary when swinging
loads.
• Be careful when working on frozen ground.
• Temperature increases will cause the ground to
become soft and make ground travel unstable.
025-E01A-0540-4
SA-1301
NEVER UNDERCUT A HIGH BANK
• The edges could collapse or a land slide could occur
causing serious injury or death.
SA-1302
To Next Page
Loading...
Need help?
General
