OPERATING ENGINE
3-4
CHECK MACHINE AFTER STARTING ENGINE
IMPORTANT: In case any abnormality is found in the
monitor, immediately stop the engine.
Trace the cause of the problem.
Check Using the Monitor
After the engine has started, check the following points
through the monitor.
1. Check that alternator indicator (3) is OFF.
In case alternator indicator (3) stays ON, immediately
stop the engine. Then, check the alternator and/or
battery system for any abnormality.
2. Check that engine oil pressure indicator (2) is OFF.
In case engine oil pressure indicator (2) stays ON,
immediately stop the engine. Then, check the engine
oil pressure system and/or the oil level for any ab-
normality.
M1MS-01-005
3
2
To Next Page
Loading...
Need help?
General
