Hitron CGN3 User Manual

Version 1.1, 08/2013. Copyright 2012 Hitron Technologies
29
Version 1.1, 08/2013. Copyright 2013 Hitron Technologies
29
Hitron CGN3 User’s Guide
Figure 8: The Setup Wizard: LAN Settings Screen
The following table describes the labels in this screen.
Table 6: The Setup Wizard: LAN Settings Screen
Private LAN IP Address Use this field to define the IP address of the CGN3 on
the LAN.
Subnet Mask Use this field to define the LAN subnet. Use dotted
decimal notation (for example, 255.255.255.0).
DHCP Status Use this field to configure whether or not the CGN3’s
DHCP server is active.
To turn the DHCP server on, click Enabled.
To turn the DHCP server off, click Disabled.
DHCP Start IP Use this field to specify the IP address at which the
CGN3 begins assigning IP addresses to devices on the
LAN (when DHCP is enabled).
DHCP End IP Use this field to specify the IP address at which the
CGN3 stops assigning IP addresses to devices on the
LAN (when DHCP is enabled).
NOTE: Devices requesting IP addresses once the
DHCP pool is exhausted are not assigned an IP
address.

Hitron CGN3 Specifications

General

Brand	Hitron
Model	CGN3
Category	Network Router
Language	English