Version 1.1, 08/2013. Copyright 2012 Hitron Technologies
95
Version 1.1, 08/2013. Copyright 2013 Hitron Technologies
95
Hitron CGN3 User’s Guide
Rule Status Use this field to select whether the filtering rule should
be active or not.
Select Enabled to activate the rule. Matching traffic
will be blocked.
Select Disabled to deactivate the rule. Matching
traffic will not be blocked.
Manage All Day Use this field to specify whether the filtering rule should
apply on all days of the week, at all times, or whether the
rule should be applied only at certain times.
Select YES to apply the rule at all times.
Select NO to apply the rule only at certain times.
Additional fields display, allowing you to specify the
times at which the rule should be applied.
Figure 39: Additional Service Filtering Options
Use the Managed Weekdays fields to specify the
days on which the rule should be applied. A red
background indicates that the rule will be applied
(traffic will be blocked), and a green background
indicates that the rule will not be applied (traffic will
not be blocked). Click a day to toggle the rule on or
off for the relevant day.
Use the Manage Time Start fields to specify the
period during which the rule should be applied.
Enter the start time in the From fields, using twenty-
four hour notation, and enter the end time in the To
fields.
Apply Click this to save your changes to the fields in this
screen.
Close Click this to return to the Service Filter screen without
saving your changes to the rule.
Table 36: The Security: Service Filter Add/Edit Screen
To Next Page
Loading...
Need help?
General
