Version 1.1, 08/2013. Copyright 2012 Hitron Technologies
91
Version 1.1, 08/2013. Copyright 2013 Hitron Technologies
91
Hitron CGN3 User’s Guide
The following table describes the labels in this screen.
Table 34: The Security: Firewall Screen
Firewall Level Select the level of firewall protection that you want to
apply to your LAN. Details about the protection level
display beneath the buttons.
(Security Level) These fields describe the specific protocols and
applications that are permitted or denied by the firewall
security level you select.
When you select Custom in the Firewall Level field,
additional fields display that allow you to toggle specific
features on or off:
Entire Firewall: select ON to enable firewall
security protection, or select OFF to disable it (not
recommended).
HTTP: use this field to Allow or Deny HyperText
Transfer Protocol traffic.
ICMP: use this field to Allow or Deny Internet
Control Message Protocol traffic.
Multicast: use this field to Allow or Deny multicast
traffic (sent to multiple devices at once).
P2P: use this field to Allow or Deny peer-to-peer
traffic (such as BitTorrent).
Ident: use this field to Allow or Deny Identification
protocol traffic. The Identification protocol allows
remote hosts to request identifying information
about users of a device.
Save Changes Click this to save your changes to the fields in this
screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
To Next Page
Loading...
Need help?
General
