Version 1.1, 08/2013. Copyright 2012 Hitron Technologies
96
Version 1.1, 08/2013. Copyright 2013 Hitron Technologies
96
Hitron CGN3 User’s Guide
7.3.2 Adding or Editing a Trust PC List
To add a new trust PC to the list, click Add Trust Device in the Security >
Service Filter screen.
To edit an existing trust PC in the list, locate the device in the Security >
Service Filter screen and click its Manage button.
NOTE: NOTE: Ensure that Enabled is selected in the Security > Service Filter
screen in order to add or edit a trust PC.
The following screen displays.
Figure 40: The Security: Service Filter > Trust PC List Add/Edit Screen
The following table describes the labels in this screen.
Table 37: The Security: Service Filter Add/Edit Trust Manage Device Screen
Host Name
This displays the name of each network device connected.
IP Address This displays the IP address of each network device
connected.
Rule Status Use this field to select whether the filtering rule should
be active or not.
Select Enabled to activate the rule. Matching traffic
will be blocked.
Select Disabled to deactivate the rule. Matching
traffic will not be blocked.
To Next Page
Loading...
Need help?
General
