Version 1.1, 08/2013. Copyright 2012 Hitron Technologies
86
Version 1.1, 08/2013. Copyright 2013 Hitron Technologies
86
Hitron CGN3 User’s Guide
6.6 Device Reset Screen
Use this screen to reboot your CGN3, or to return it to its factory default settings.
Click Admin > Device Reset. The following screen displays.
Figure 35: The Admin: Device Reset Screen
SNTP Function
Use this field to select whether the SNTP Function be
active or not.
Select Enabled to activate the SNTP Function.
Select Disabled to deactivate the SNTP Function.
NOTE: The Simple Network Time Protocol (SNTP) is
an adaptation of the Network Time Protocol
(NTP) used to synchronize computer clocks in
the Internet.
Time Zone Use this fields to select the time zome when the SNTP
Function
enabled .
Assign SNTP Server Enter the SNTP Server you want to assign manually.
Daylight Function
Use this field to select whether the Daylight Function be
active or not.
Select Enabled to activate the Daylight Function.
Select Disabled to deactivate the Daylight Function.
Daylight Time
Enter the duration of the daylight time.
Table 32: The Admin: Time Setting Screen (continued)
To Next Page
Loading...
Need help?
General
